outside (pre) NEAR WHEN YOU DO WORK IN A FUEL TANK, A PERSON MUST BE NEAR THE TANK AT ALL TIMES. When you do work in a fuel tank, a person must be outside the tank at all times.
outwards (adv) OUT MOVE THE DOOR OUT AND FORWARD. Move door outwards and forwards.
over (pre) ABOVE, ALONG, ON, MORE THAN MAKE SURE THAT THE HYDRAULIC FLUID LEVEL IS NOT ABOVE THE "FULL" MARK. Make sure the hydraulic fluid level is not over the FULL mark.
APPLY THE WEIGHT EQUALLY ALONG THE STABILIZER SPAN. The weight must be evenly spread over the stabilizer span.
INSTALL THE STOP SLEEVE ON THE SLIDING MEMBER. Install stop sleeve over sliding member.
DO NOT INSTALL SHIMS THAT ARE MORE THAN 0.1 mm THICK. Do not install shims over 0.1 mm thick.
OVERBOARD (adv) Out of the aircraft RELEASE THE AIR OVERBOARD.
overfill (v) TOO MUCH DO NOT PUT TOO MUCH FLUID IN THE XXXX. Do not overfill the XXXX.
overfull (adj) TOO FULL IF THE TANK IS TOO FULL, YOU CANNOT PRESSURIZE IT CORRECTLY. If the tank is overfull, it cannot be properly pressurized.
OVERHAUL (n) The work necessary to put an item or equipment back to a serviceable condition REMOVE THE DAMAGED WHEEL FOR AN OVERHAUL.
overhaul (v) OVERHAUL (n) DO AN OVERHAUL OF THE NO. 2 ENGINE. Overhaul the No. 2 engine.
overheat (v) TOO HOT IF YOU PRESSURIZE THE OXYGEN BOTTLE QUICKLY, IT WILL BECOME TOO HOT. Rapid charging overheats the oxygen bottle.
OVERLAP (n) The area in which a part of one (TN) surface is on a part of a second (TN) surface REPLACE THE PART IF THE OVERLAP IS MORE THAN 0.01 mm.
overlap (v) OVERLAP (n) MAKE AN OVERLAP OF 10 mm. Overlap the surfaces by 10 mm.
OVERRIDE (v), OVERRIDES, OVERRODE, OVERRIDDEN To prevent the automatic operation of a part or system OVERRIDE THE START SEQUENCE MANUALLY.
oversized (adj) TOO LARGE MAKE SURE THAT THE RIVET HOLES ARE NOT TOO LARGE. Ensure the rivet holes are not oversized.
overtighten (v) TIGHTEN TOO MUCH, TOO TIGHT, TOO TIGHTLY DO NOT TIGHTEN THE FITTINGS TOO MUCH.
DO NOT MAKE THE FITTINGS TOO TIGHT.
DO NOT INSTALL THE FITTINGS TOO TIGHTLY. Do not overtighten fittings.
pack (v) PUT, FILL PUT THE ASSEMBLY INTO THE BOX. Pack assembly into the box.
FILL THE XXXX WITH GREASE. Pack grease into the XXXX.
PAINT (v),
PAINTS, PAINTED, PAINTED To apply paint (TN) to something PAINT ALL THE SURFACES.
|
