ITS (adj) "Belonging" to a "thing" REMOVE THE UNIT AND ITS WIRING.
jack (v) JACK (TN) DO NOT LIFT THE AIRCRAFT ON JACKS IF THE WIND SPEED IS MORE THAN 20 MPH. Do not jack the aircraft if the wind speed exceeds 20 mph.
jam (v) FREELY (adv) MAKE SURE THAT THE VALVE SPINDLE MOVES FREELY. Check that valve spindle does not bind or jam.
jar (v) SHAKE DO NOT SHAKE THE INSTRUMENTS. Do not jar instruments.
job (n) WORK DO THIS WORK IN A CLEAN AREA. Accomplish this job in a clean area.
join (v) BOND, ATTACH, CONNECT USE ADHESIVE XXXX TO BOND METAL TO METAL. Use adhesive XXXX to join metal to metal.
ATTACH SMOKE DETECTOR 1 TO SMOKE DETECTOR 2. Join smoke detectors 1 and 2.
CONNECT THE HOSE TO THE PIPE WITH A CLIP. Join the hose to the pipe with a clip.
JOINT (n) The area at which two surfaces or edges touch or are attached SEAL THE JOINT WITH SEALING COMPOUND.
jolt (v) SHAKE DO NOT SHAKE THE INSTRUMENTS. Do not jolt instruments.
just (adv) IMMEDIATELY KEEP THE RING IMMEDIATELY ABOVE THE JACK COLLARS. Keep the ring just above the jack collars.
KEEP (v),
KEEPS, KEPT, KEPT To continue to have or hold KEEP THE COMPOUND IN A CLOSED CONTAINER.
keyed (adj) REFER (v), KEY (TN) THE ILLUSTRATION REFERS TO EACH STEP. The illustration will be keyed to each of the steps.
INSTALL THE KEY BETWEEN THE PULLEY AND THE SHAFT. The pulley must be keyed to the shaft.
KILL (v),
KILLS, KILLED, KILLED To cause death (TN) HIGH VOLTAGES CAN KILL.
kind (n) TYPE YOU CAN USE TWO TYPES OF SEALING COMPOUND. Two kinds of sealing compound can be used.
kink (v) KINK (TN) DO NOT MAKE KINKS IN THE CABLES. Do not kink the cables.
knock (v) HIT HIT THE CLAMP ON THE RIGHT SIDE WITH A HAMMER. Knock clamp on right-hand side with a hammer.
KNOW (v),
KNOWS, KNEW, KNOWN To be sure of data, to have data "ready" to use IF YOU KNOW THE CLEARANCE, YOU CAN CALCULATE THE WASHER THICKNESS.
label (v) LABEL (TN) PUT A LABEL ON THE RELAY ASSEMBLY. Label the relay assembly.
LAMINATED (adj) Made of laminations THIS PANEL IS MADE OF LAMINATED CARBON FIBER.
LAMINATION (n) Layers of one (TN) or more materials bonded together IF THE LAMINATIONS ARE DAMAGED, REPLACE THE PANEL.
land (v) MAKE A LANDING (TN) AFTER A HEAVY LANDING, DO THE HEAVY LANDING INSPECTION. If the aircraft landed heavily, perform the Heavy Landing Inspection.
|
